Wednesday, 27 July 2016

Reprinting

When I downloaded the entry form for the West Lancs Open from the Chapel Gallery I noticed a call for entries for their Christmas exhibition from artists who work with stories – fable, myth and personal narratives.

I sent off my CV and some photos and I’ve been accepted!

Amongst the images I sent were the Taylor Brothers. I got the prints out of the drawer this week to check they were OK and I realised I’d printed them all on off white or cream paper, which I wasn’t too keen on in retrospect. So I reprinted them on smooth white this week.

Sunday, 17 July 2016

Yet Another Try

I went to Hot Bed Press to print on Friday fully intending to redo the perspective book as a soft ground etching but when I looked more closely at the first plate and the test prints I decided that most of the problems were down to wiping not biting so I’m going to think about book covers and paper weight then try printing it again later.

So having nothing else prepared I decided to have another go at gum arabic transfer for resist.
 I still over cooked it in the solution but the resist took much better than last time. 
 The raggedness of the text I think was due to me jiggling the bath while the plate was biting. Not an intentional effect but one I will bear in mind for the future.

I also tried adding gum arabic transfer on top of the etching.
 And reprinting the etching plate on top of that. 
Then home and a trip to Ormskirk where the opening of the West Lancs Open Exhibition was taking place in the Chapel Gallery. I’m please to say that both Rapunzelle and Concession Pereptuelle were accepted

Saturday, 9 July 2016

Large etching finished

Well I’ve finished the etching that I wanted to use for the perspective book but I think I managed to get grease on some areas of the plate while I was working on the tones so it hasn't bitten evenly in a couple of places. Having proofed it and worked into the more obvious blots and problems I'm still not sure about it.
I have another plate so I think I'll redo the image but this time I'll try a soft ground for the line etch just to see how the two compare. If I'm still not happy I can always revert to pen, watercolour and digital.

Sunday, 3 July 2016

Book in a jar

After fiddling, experimenting and several strops I finally came to the conclusion that trying to print a 6 x 84cm image wasn’t going to work as a 4 colour separation gum arabic print. I’m not really sure why I thought it could in the first place.

Having decided that digital was going to be the way forward it meant accepting that I was working with cartridge paper.
I explored various closures and ways of attaching the scroll to dowel then realised the paper height was the right size to fit in the jar I use to mix my gum arabic in. Given the subject matter it seemed to make perfect sense.  So I bound the short edges with copper to finish them off and made a belly band with the image extending over it to hold the scroll shut.
It is intended as a comment on the practice of killing for collecting, such as big game hunting, birds egg collecting etc, rather than on the serious academic study of butterflies and moths. Not at all what I thought it was going to be when I started but I’m still pleased with it.

Tuesday, 28 June 2016

Different Paper

I’m thinking of making this as a scroll inside a book or box so I started to experiment with the structure.
Cartridge paper is far too springy for what I had in mind and for once the internet doesn’t seem to have any helpful suggestions for paper type or weight.
I went looking through my stuff for something more malleable than cartridge, less fragile than tissue and in long enough lengths that I won’t have to piece it.
I found interfacing...
(it takes the ink much better than I thought but needs a backing paper to read clearly. Probably not what I need for this project but definitely something to come back to)
...and rice paper from a long ago experiment with Chinese calligraphy.
I thought the lack of size in the paper might be a problem with such a wet process but it seems OK. 

Next step 4 colours, and trying to print with a master and on paper that are both too long for the press bed.

Saturday, 25 June 2016

There’s been a murrderrr....

The past two Fridays the drama group has been putting on Four Weddings at a Funeral - a murder mystery, so I haven’t quite finished etching the large plate but I have got it ready to go into the copper sulphate for the first line etch next week.

I’ve also been working on the artwork for a new book. The image will be 6 x 80cm. I’ve produced two versions, one to print using the inkjet printer and another to try printing in sections as a gum arabic transfer.

This is a small section of the image for the inkjet.


Monday, 13 June 2016

Small Etching

I've tried another mock up of the book using a scan of the tonal painting
 I've also tried the last section of the drawing as an etching and I think it’s OK.
I have a plate that’s 42 x 15 cm. On Friday I’m going to go for it! I can always go to Plan B (or should that be D for digital?) if it doesn’t work.

Thursday, 9 June 2016

New Ideas

I’ve started playing with ideas for a new book.

I started by thinking about simple folds, considering cloisters and frescos (and I will return to this later)
I’m not sure why, but this structure got me thinking about the work of Patrick Hughes. I wondered if I could translate the idea of playing with perspective and making the images appear to move at a smaller scale in book form.  

I tried a mock up and it seems to work
I’ve developed the drawing and done a tonal study at the right size.
I’m not sure if I want to work it up as painting and digitally print the image or if I want to etch it. The next step is to try etching a section before I make up my mind.

Sunday, 29 May 2016

Third Time Lucky


I thought I'd replicate the gum arabic transfer butterfly plates (so I could keep the originals to compare to) and then work into them to see how I could push them. It took three goes in three different copper sulphate solutions before they would bite and when they did take the finish was nothing like as good as before.

Next time in the studio I thought I’d try again. Different image but still gum arabic transfer. It bit straight away. I was so overwhelmed I left it in the solution for far too long. It prints mainly black with just a little detail managing to show through in parts. I think I can use it to practice scraping and burnishing on, a sort of mezzotint.

Finally on Friday I decided to try traditional hard ground resist and stop out. It needs working on but I'm finally getting somewhere.

I’ve now got several plates to work into and I’m still determined to nail gum arabic transfer as a resist

I’ve also spent large periods of time over the last two or three weeks glued to a computer. I now have a website up and running.

Saturday, 21 May 2016

Spoiler Alert

If you are taking part in the book swop Artist Books 3.0 #17 (CoLours/FolDing/ReCycling) - you might want to leave the page but if you are not....
 I finally finished cutting, folding, stitching and sticking. 
 This edition is named after the Hungarian map fold that I used as part of the structure.